80 Lbs Self Cocking Crossbow Pistol Cross Bow 15 Arrows

You Save : $21.95 (37%)

Product Description

The 80 lbs self-cocking crossbow comes with 15 metal arrows. "Self-cocking" crossbows enables you to shoot repeatedly at a more quickly rate than typical crossbows. The feature implies it is very easy to load with your hands and you don't have to use significantly force. Getting a lot faster than other people, this crossbow also will not break easily with its hassle-free and protected fiberglass prod. There is also an "auto" security that provides greater manage and Precise string alignment ensures accuracy.

Item Characteristics

Self-Cocking Crossbow
Totally free Pack of Metal Arrows ( 15 Arrows )
Straightforward to Load
Gold Color Metal Physique Crossbow All Metal Body
Brand New High Excellent

Customer Evaluations

I have the plastic (Zytel nylon/resin) version of this 80 lb crossbow pistol. Right here are a handful of strategies that may possibly interest new buyers of this gun:
1. The wrappings that reinforce the bow string ends and middle will start to fray and/or separate as you shoot a lot of bolts. The pressure from the cocking rods, pulling back on the middle of the string, causes the wrappings to separate. You can push this spiral wrapping back together with your fingers by pushing from either finish of the wrappings and then secure the wrapping by dripping some Superglue along its length. You do not need to have a lot, but apply it evenly. You can do the similar to the wrappings at each ends of the bowstring -- apply a couple drops of Superglue to keep it from fraying/unraveling.
two. The aluminum bolts are junk. The black plastic fin section WILL break off. Do not order much more of these. Order the plastic bolts that are readily available from Amazon and a number of other websites. They will final significantly longer.
three. There is a main screw that holds the prod (bow) on the gun. This screw will loosen on its own due to the vibration of shooting. It will loosen to the point that the holding plate and plastic vibration dampening chip will fall out. To keep away from this, take away the main screw (the a single that you have to tighten with an allen wrench) and apply a couple of drops of BLUE Locktite (not RED!). Read the bottle relating to application directions/drying time.Then reinsert and tighten this screw -- do not overtighten just firm. This will resolve this difficulty.
4. Gently check and tighten all screws on the gun periodically.
five. Out of the box, the sights are not truly set and will shoot bolts really high over your bullseye at close ranges (50' or less). To bring the bolts down closer to the bullseye, screw the top wheel/screw down pretty a bit.
6. Be sure to tighten the smaller Phillips head screw at the base of the sight mechanism considering that it might be loose and this will permit the entire sight program to shift left or ideal. When it really is tight you can adjust left/perfect bolt strikes applying the side adjustment wheel.
7. The trigger is really difficult to pull and this can throw off your aim/shot. I find that I get a smoother shot if I extend my regular trigger finger a tiny further than regular by way of the trigger hole and use the index finger on my opposite hand to assist in pulling the trigger. I'm resting the "added" index finger on my regular trigger finger and pulling with both, adding to the pulling power and resulting in a smoother release.
eight. This will be hard to describe right here, but the way that I was able to compress the bow (aka "prod")in order to get the bowstring on was to: a. install the fiberglass bow on gun physique as shown in images on the box, b. use a piece of substantial rope and tied it close to one particular finish of the bow and then ran the rope back behind the pistol deal with and about to the other finish of the bow. Here's exactly where it gets a tiny tricky. I employed a trucker's hitch/knot (you can find pics of this on the internet)to gradually pull the bow tighter and tighter till I could get the string on. The trucker's hitch uses two knotted loops to multiply your pulling power. A sturdy friend is also valuable.
9. This is a effective weapon and should NOT be used by children alone! However, it is entertaining to let children shoot it under close adult supervision. For target shooting, I found that a variety of layers of old or remnant deep pile carpet stacked or folded will conveniently cease these bolts and leave them relatively very easy to take away.
Take pleasure in!

I'll start out off by saying I'm really satisfied with the item. The crossbow itself is nicely constructed and sturdy and the bolts that came with it have a very good weight and really feel to them.
Pros:
- Great design, sturdy and nicely produced
- Shoots beautifully and with a lot of force
- Remarkable safety mechanism
- Feels really good firing
- Straightforward to assemble
Just seeking at this crossbow you know you have got a quality item. I'm most certainly seeking forward to slaying some rabbits and squirrels with this issue. It came with a package of additional bolts that have wicked sharp hints.
Cons:
- Stringing the prod is hard if you happen to be not very sturdy
- Cocking is also somewhat awkward if you're not pretty strong
I am a weak tiny skinny individual so I cannot complain too much about that.
All in all, I could not be happier with this item. It is everything it was advertised to be and I would most certainly advocate it to any one.
except serial killers and kids

You Save : $21.95 (37%)